Generic windows io error dell diagnostics

Feedback will be sent to Microsoft: By pressing the submit button, your feedback will be used to improve Microsoft products and services. Privacy policy. This article describes virtual machine VM generic performance troubleshooting through monitoring and observing bottlenecks and provides possible remediation for issues that may occur. To check whether you have the VM diagnostics enabled, see Azure Resource logs overview.

If you see the following, then you most likely don't have the diagnostics enabled:. You can check the storage account used for Diagnostics setup from Agent tab under Diagnostics Settings. Storage is a very important tier when we intend to analyze IO performance for a Virtual Machine in Azure.

For storage related metrics we need to enable diagnostics as an additional step. This could also be enabled, if we only want to analyze the storage related counters. Identify which storage account or accounts your VM is using by selecting the VM.

Click Settings , and then click Disks :. In the portal, go to the storage account or accounts for the VM and work through the following steps:. Click on any of the metrics, which will show another blade with more options to configure and add metrics.

Once we are through the initial setup process for needed metrics, and post enabling the diagnostics for VM and related Storage account, we can shift to analysis phase. To identify if you have any resource bottlenecks, review your data. If your find that your machine has been running fine, but it has been reported that the performance has recently degraded, review a time range of data that encompasses performance metric data before the reported changed, during and after the issue.

When looking at performance issues, be aware of the trends and understand if they affect you. In the next sections, we'll use the Monitoring graphs from the portal to show trends. For more information, see Tracelog. To stop tracing from a remote computer, run this command: logman.

The default location for logman. Use the -s option to supply a computer name. You can also configure tracing by editing the Kerberos registry values shown in the following table. If you used Tracelog , look for the following log file in your current directory: kerb.

If you used the registry key settings shown in the previous table, look for the trace log files in the following locations:. To decode event trace files, you can use Tracefmt tracefmt. Tracefmt is a command-line tool that formats and displays trace messages from an event trace log file. Tracefmt can display the messages in the Command Prompt window or save them in a text file.

For more information, see Tracefmt. The smart card resource manager service runs in the context of a local service. It's implemented as a shared service of the services host svchost process. In the Windows Task Manager dialog box, select the Services tab. A cluster node cannot be evicted from the cluster unless the node is down or it is the last node. The operation failed because either the specified cluster node is not the owner of the resource, or the node is not a possible owner of the resource.

The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group. The cluster resource could not be deleted or brought offline because it is the quorum resource. The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource.

The properties were stored but not all changes will take effect until the next time the resource is brought online. The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.

The cluster node failed to take control of the quorum resource because the resource is owned by another active node.

The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network. One or more cluster resources depend on the network to provide service to clients. The client access capability cannot be removed from the network. This operation cannot be performed on the cluster resource because it is the quorum resource.

This quorum resource cannot be brought offline and its possible owners list cannot be modified. The cluster join operation failed due to incompatible software versions between the joining node and its sponsor. This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor. The system configuration changed during the cluster join or form operation.

The join or form operation was aborted. The specified node does not support a resource of this type. This might be due to version inconsistencies or due to the absence of the resource DLL on this node. The specified resource name is not supported by this resource DLL.

This might be due to a bad or changed name supplied to the resource DLL. You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group. The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This can happen during a join operation if the cluster database was changing during the join.

The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This can happen if the resource is in a pending state. An attempt to modify a resource property failed because it conflicts with another existing property. The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node.

The cluster node was evicted from the cluster successfully, but the node was not cleaned up. To determine what clean-up steps failed and how to recover, see the Failover Clustering application event log using Event Viewer. This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed. A cluster cannot be created with the specified cluster name because that cluster name is already in use.

Specify a different name for the cluster. The drive letter assigned to a system disk on one node conflicted with the drive letter assigned to a disk on another node. One or more nodes in the cluster are running a version of Windows that does not support this operation. The name of the corresponding computer account does not match the network name for this resource. The resource type cannot accept the request because it is too busy performing another operation.

The address is not valid for an IPv6 Address resource. A global IPv6 address is required, and it must match a cluster network. Compatibility addresses are not permitted. A network error occurred while sending data to another node in the cluster. The number of bytes transmitted was less than required. An internal cluster error occurred. A cluster database transaction was attempted while a transaction was already in progress.

There was an attempt to commit a cluster database transaction while no transaction was in progress. An error occurred while reading from a stream of data. An unexpected number of bytes was returned. An error occurred while writing to a stream of data. The required number of bytes could not be written. One or more property values for this resource are in conflict with one or more property values associated with its dependent resources.

The cluster network is not valid for an IPv6 address resource, or it does not match the configured address. The cluster network is not valid for an IPv6 tunnel resource. The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file.

The remote server sent an invalid response for a file being opened with client-side encryption. Client-side encryption is not supported by the remote server even though it claims to support it.

The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks can be configured to run in other accounts. The log service encountered an attempt to read from a marshaling area with an invalid read context. The number of reserved log records or the adjustment of the number of reserved log records is invalid. Records were appended to the log or reservation changes were made, but the log could not be flushed.

The log is pinned due to reservation consuming most of the log space. Free some reserved records to make space available. The caller has called a response API, but the response is not expected because the transaction manager did not issue the corresponding request to the caller. It is too late to perform the requested operation because the transaction has already been aborted. It is too late to perform the requested operation because the transaction has already been committed. The transaction manager was unable to be successfully initialized.

Transacted operations are not supported. The specified resource manager made no changes or updates to the resource under this transaction. The resource manager has attempted to prepare a transaction that it has not successfully joined.

The transaction object already has a superior enlistment, and the caller attempted an operation that would have created a new superior.

Only a single superior enlistment is allowed. The current transaction context associated with the thread is not a valid handle to a transaction object. The specified resource manager was unable to create an enlistment because its associated transaction manager is not online. The specified transaction manager was unable to create the objects contained in its log file in the ObjectB namespace.

Therefore, the transaction manager was unable to recover. Transaction support within the specified file system resource manager is not started or was shut down due to an error. The metadata of the resource manager has been corrupted. The resource manager will not function.

The object file, stream, link corresponding to the handle has been deleted by a transaction savepoint rollback. The specified file miniversion was found but has been invalidated. The most likely cause is a transaction savepoint rollback.

The handle has been invalidated by a transaction. The most likely cause is the presence of memory mapping on a file, or an open handle when the transaction ended or rolled back to savepoint. The transaction outcome is unavailable because the resource manager responsible for it is disconnected. The file cannot be opened in a transaction because its identity depends on the outcome of an unresolved transaction.

The operation cannot be performed because another transaction is depending on the fact that this property will not change. The operation would involve a single file with two transactional resource managers and is therefore not allowed. The operation would leave a transactional resource manager in an inconsistent state and is, therefore, not allowed.

A rollback could not be scheduled because a previously scheduled rollback has already been executed or is queued for execution. An attempt to create space in the transactional resource manager's log failed. The failure status has been recorded in the event log. Memory mapping creating a mapped section to a remote file under a transaction is not supported. Promotion was required to allow the resource manager to enlist, but the transaction was set to disallow it. This file is open for modification in an unresolved transaction and can be opened for execution only by a transacted reader.

The request to thaw frozen transactions was ignored because transactions were not previously frozen. The target volume is not a snapshot volume. This operation is only valid on a volume mounted as a snapshot. The savepoint operation failed because files are open on the transaction.

This is not permitted. Windows has discovered corruption in a file, and that file has since been repaired. Data loss might have occurred. The call to create a transaction manager object failed because the Tm Identity stored in the logfile does not match the Tm Identity that was passed in as an argument. There is no valid data. The transactional resource manager cannot currently accept transacted work due to a transient condition, such as low resources. The transactional resource manager had too many transactions outstanding that could not be aborted.

The transactional resource manager has been shut down. The modem did not accept the command sent to it. Verify that the configured modem name matches the attached modem. The modem did not respond to the command sent to it. Verify that the modem is properly cabled and turned on. Dial tone not detected within the required time. Verify that the phone cable is properly attached and functional.

The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation. An attempt has been made to connect to a session whose video mode is not supported by the current client.

The requested operation can be performed only on the system console. This is most often the result of a driver or system DLL requiring direct console access. The requested session cannot be controlled remotely. This might be because the session is disconnected or does not currently have a user logged on. Your request to connect to this terminal server has been rejected. Your terminal server client license number is currently being used by another user.

Call your system administrator to obtain a unique license number. Your terminal server client license number has not been entered for this copy of the terminal server client. Contact your system administrator. The number of connections to this computer is limited and all connections are in use right now. Try connecting later or contact your system administrator.

Remote control could not be terminated because the specified session is not currently being remotely controlled. The remote control of the console was terminated because the display mode was changed.

Changing the display mode in a remote control session is not supported. Activation has already been reset the maximum number of times for this installation. Your activation timer will not be cleared. Only the current user or an administrator can log on to this computer. You do not have permission to log in at this time. The terminal server security layer detected an error in the protocol stream and has disconnected the client.

The file replication service API terminated the request. The event log might contain more information. The file replication service terminated the request. The file replication service cannot be contacted. The file replication service cannot satisfy the request because the user has insufficient privileges.

The file replication service cannot satisfy the request because authenticated RPC is not available. The file replication service cannot satisfy the request because the user has insufficient privileges on the domain controller. The file replication service cannot satisfy the request because authenticated RPC is not available on the domain controller. The file replication service cannot communicate with the file replication service on the domain controller.

The file replication service on the domain controller cannot communicate with the file replication service on this computer. The file replication service cannot populate the system volume because of an internal error.

The file replication service cannot populate the system volume because of an internal time-out. The file replication service cannot process the request. The system volume is busy with a previous request. The file replication service cannot stop replicating the system volume because of an internal error. An error occurred while installing the directory service.

For more information, see the event log. The requested operation could not be performed because the directory service is not the master for that type of operation.

The directory service was unable to initialize the subsystem that allocates relative identifiers. The requested operation did not satisfy one or more constraints associated with the class of the object.

The directory service cannot perform the requested operation on the relative distinguished name RDN attribute of an object. The root object must be the head of a naming context. The root object cannot have an instantiated parent. The add replica operation cannot be performed. The naming context must be writable to create the replica.

An attempt was made to add an object of a class that does not have an RDN defined in the schema. An attempt was made to modify an object to include an attribute that is not legal for its class. The operation could not be performed because the object's parent is either uninstantiated or deleted. The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object. The current FSMO holder could not be contacted. Schema update failed: Class in the subclass of the list does not exist or does not satisfy hierarchy rules.

The tree deletion is not finished. The request must be made again to continue deleting the tree. No superior reference has been configured for the directory service. The directory service is, therefore, unable to issue referrals to objects outside this forest.

The GC verification failed. The GC is not available or does not support the operation. Some part of the directory is currently not available. This directory server is shutting down, and cannot take ownership of new floating single-master operation roles. The directory service is missing mandatory configuration information and is unable to determine the ownership of floating single-master operation roles. The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.

The naming context is in the process of being removed or is not replicated from the specified server. A synchronization attempt failed because the destination DC is currently waiting to synchronize new partial attributes from the source.

This condition is normal if a recent schema change modified the partial attribute set. The destination partial attribute set is not a subset of the source partial attribute set.

The replication synchronization attempt failed because a master replica attempted to sync from a partial replica. The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.

The version of the directory service schema of the source forest is not compatible with the version of the directory service on this computer.

If you require a response, contact support. Skip To Main Content. Identify Devices with Errors in Device Manager. Safari Chrome Edge Firefox. Support Navigation Support. Close Window. What are you seeing? Errors on devices in Device Manager.